Homepage | Set Home | Add to Favorites

Wuxi Yuda Light Industry Machinery Factory

  • No Category

Friends links

Hot Stamping Machine for ABS Fridge Profiles
Click image to view full size image
Product: Views:481Hot Stamping Machine for ABS Fridge Profiles 
Unit price: Negotiable
Delivery date: Since the payment date Days delivery
Valid until: Long-term effective
Last updated: 2019-02-28 14:24

Description of hot stamping machine for abs fridge profiles


Part 1. Application:

☆ This OTR100 Model hot stamping machine is special designed for decorating various PVC/PS/WPC/ABS/PVC foaming small profiles within 100mm widths; Now it is special used to decorating imitation marble stone profiles;

☆ Normally for PVC marble profiles, there have 5-9surfaces, so we always match 10sets of online hot stamping machine to get complete marble designs;

☆ For PS picture frame, it also need match 5-10sets, some for embossing, some for hot stamping, that will depended on the designs.

☆ It is installed on the extrusion line, before Haul-off machine and after calibration table;

☆ The center height of machine is 1000mm per center height of extrusion line.



Part2. The technical parameter of machine:


Technical Parameters

OTR100 Type Hot Stamping Machine

Max width of thermoprinting


Max transmitting width


The speed of thermoprinting 

1—10 m/min ( adjustable)

Thickness of panels 

5—100 mm

Transmission power 

0.12 KW(with timing motor)

heating power 

1.5KW by stainless steel heating loop

The total power 

1.55 KW

Power source 

380V, 50 Hz

Total weight 


Center height


Visual sizes 

(L*W*H) 750 × 750× 2000 mm

Part 3:  Basic assembly of OTR100

3.1) The stamping head unit

① It adopts ZL102 to make base-plate of thermoprinting which connect between slide shaft and slide seat.

② It adopts ZL102 to make heating cover and 2 stainless steel heating pump(650w/pc) for heating, the temperature is controlled by TC Panel.

It adopts 45 steels to make axle and seat of thermoprinting.

③ It adopts ZL102 wrapped with anti high temperature silicon rubber to make stamping wheel.

④ It adopts 25w gear speed-down motor to drive stamping roller by gears.

3.3) winding & unwinding unit

① It adopts 45# steel to make shaft and Q235 to make joint plate.

② It adopts organic glass to make clamp for clamping film and aluminum loop to make fixed components.

③ It adopts 25w electronic timing gear speed-down motor to drive winding shaft by gears.

④ It adopts Q235 to make joint plate and 45# light&round steel to make shaft of guiding film.

3.4)  Electric control unit

① It adopts cold rolled steel to make electric container.

② The electric components of equipment adopts famous brand in home market.


Part 4. Flow chart of OTR100